A
-
Acoustic sensor
Monitoring and Estimating Sugarcane Losses during Harvesting Using Sound Analysis [Volume 2, Issue 1, 2023, Pages 40-47]
-
Air-to-air cross-flow plate
Design and Evaluation of Forced Convection Solar Dryer Equipped with a Heat Exchanger for Crop Drying [Volume 1, Issue 2, 2022, Pages 32-36]
-
Analytical model
Analytical Traction Force Model Development for Soil-Tire Interaction: Incorporating Dynamic Contact Area and Parameter Analysis Using Taguchi Method [Volume 2, Issue 2, 2023, Pages 56-64]
-
Angle of attack
A Study on Improving the Blades of a Three-Blade Horizontal Axis Wind Turbine for Agricultural Areas Using a Laboratory Made Model [Volume 1, Issue 2, 2022, Pages 13-20]
-
Animal feed
Design and Evaluating a Hydraulic Pelletizing Machine for Producing Feed Pellets from Pistachio Shells [Volume 2, Issue 2, 2023, Pages 112-129]
-
Animal Waste Management
Using Biogas Derived Digestate of Chicken Manure for Wheat Crop Fertilization: A Laboratory-Scale Investigation [Volume 1, Issue 1, 2022, Pages 47-54]
-
Apples
Investigating the Kinetics, Energy and Exergy of Drying Apple Slices Using Infrared Radiation [Volume 2, Issue 1, 2023, Pages 1-10]
-
Arc discharge
Investigating the Effect of Cold Plasma on some Chemical Properties of Date Fruits (Phoenix dactylifera L.) [Volume 2, Issue 1, 2023, Pages 56-67]
-
Automation
Online Detection of Tomatoes for Robotic Harvesting [Volume 2, Issue 2, 2023, Pages 130-142]
B
-
Balance
Determining Parameters Affecting the Balance of Compost Fertilizer Mixing Machine [Volume 2, Issue 1, 2023, Pages 68-75]
-
Barley
Investigating the Effect of Some Operating Factors on the Performance of a Laboratory Cluster Threshing Machine – Case Study: Two Barley Varieties [Volume 1, Issue 2, 2022, Pages 86-92]
-
Bat algorithm
A Dynamic Model for Estimating Tire Contact Patch Using Machine Vision Techniques [Volume 2, Issue 2, 2023, Pages 28-38]
-
Bath temperature
Effect of Ultrasound on Mechanical Properties of Walnut [Volume 2, Issue 1, 2023, Pages 24-31]
-
Bibliometric analysis
Global Trends and Status in Bioenergy Research during the Years 2000-2020: A Systematic Bibliometric Analysis [Volume 1, Issue 1, 2022, Pages 55-69]
-
Bio alcohols
Investigating the Effect of Using of Different Alcohols as Gasoline Additives on an Engine Emitted Pollutants [Volume 1, Issue 2, 2022, Pages 21-25]
-
Bio-alcohols
Evaluation of the Energy Balance of a Gasoline Engine Using Ethanol and n-Butanol as Additives [Volume 2, Issue 2, 2023, Pages 102-111]
-
Biochar
Investigating the Effects of Using of Biochar as a Replacement for Minerals Premix in Layers Diet on Physical and Mechanical Properties of Their Egg Shells [Volume 1, Issue 1, 2022, Pages 12-15]
-
Biodiesel
Investigating the Effects of Some Operating Parameters Affecting Biodiesel Production from Used Vegetable Oil [Volume 1, Issue 2, 2022, Pages 65-68]
-
Bioenergy
Using Biogas Derived Digestate of Chicken Manure for Wheat Crop Fertilization: A Laboratory-Scale Investigation [Volume 1, Issue 1, 2022, Pages 47-54]
-
Bioenergy
Global Trends and Status in Bioenergy Research during the Years 2000-2020: A Systematic Bibliometric Analysis [Volume 1, Issue 1, 2022, Pages 55-69]
-
Biofertilizer
Using Biogas Derived Digestate of Chicken Manure for Wheat Crop Fertilization: A Laboratory-Scale Investigation [Volume 1, Issue 1, 2022, Pages 47-54]
-
Biofuels
Evaluation of the Energy Balance of a Gasoline Engine Using Ethanol and n-Butanol as Additives [Volume 2, Issue 2, 2023, Pages 102-111]
-
BioGas
Production of Biogas from Dairy Manure and Frying Oil in a Continuous Flow Digestion Equipped with an Automatic Control System [Volume 1, Issue 2, 2022, Pages 26-31]
-
BioGas
Feasibility Study and Simulation of Utilization of Renewable Energies in a Broiler Industry [Volume 2, Issue 1, 2023, Pages 11-23]
-
Biohydrogen
Regulation of Metabolic Pathway for Bio-Hydrogen Production in Dark Fermentation via Redox Potential [Volume 2, Issue 2, 2023, Pages 10-18]
-
Biomass
Thermal Decomposition and Combustion Characteristics of Pistachio Pruning Residues [Volume 2, Issue 2, 2023, Pages 87-94]
-
Black scab disease
An Algorithm to Extract the Defective Areas of Potato Tubers Infected with Black Scab Disease Using Fuzzy C Means Clustering for Automatic Grading [Volume 2, Issue 1, 2023, Pages 32-39]
-
Blade taper ratio
A Study on Improving the Blades of a Three-Blade Horizontal Axis Wind Turbine for Agricultural Areas Using a Laboratory Made Model [Volume 1, Issue 2, 2022, Pages 13-20]
-
Boxwood
Measuring Some Mechanical Properties of Boxwood and Privet Plants by an Izod Impact Tester [Volume 1, Issue 2, 2022, Pages 7-12]
C
-
Calorific value
Thermal Decomposition and Combustion Characteristics of Pistachio Pruning Residues [Volume 2, Issue 2, 2023, Pages 87-94]
-
Chicory
The Effect of Low Pressure Oven Drying of Chicory Root on Quality and Extraction Time of Inulin [Volume 1, Issue 2, 2022, Pages 61-64]
-
Chopper
Redesigning a Stalk Chopper Mechanism for Reducing Cutting Energy and Optimizing Its Bite Length [Volume 1, Issue 2, 2022, Pages 69-73]
-
Chopping cylinder
Redesigning a Stalk Chopper Mechanism for Reducing Cutting Energy and Optimizing Its Bite Length [Volume 1, Issue 2, 2022, Pages 69-73]
-
Closed circuit camera
Monitoring and Estimating Sugarcane Losses during Harvesting Using Sound Analysis [Volume 2, Issue 1, 2023, Pages 40-47]
-
Cold plasma
Investigating the Effect of Cold Plasma on some Chemical Properties of Date Fruits (Phoenix dactylifera L.) [Volume 2, Issue 1, 2023, Pages 56-67]
-
Collector
Design and Evaluation of Forced Convection Solar Dryer Equipped with a Heat Exchanger for Crop Drying [Volume 1, Issue 2, 2022, Pages 32-36]
-
Combine
Optimizing the Effect of Spike Density and Combine Speed for Reducing Wheat Loss Using Response Surface Methodology [Volume 2, Issue 2, 2023, Pages 19-27]
-
Combined heat and power system (CHP)
Feasibility Study and Simulation of Utilization of Renewable Energies in a Broiler Industry [Volume 2, Issue 1, 2023, Pages 11-23]
-
Combustion Enthalpy
Thermal Decomposition and Combustion Characteristics of Pistachio Pruning Residues [Volume 2, Issue 2, 2023, Pages 87-94]
-
Compost fertilizer mixer
Determining Parameters Affecting the Balance of Compost Fertilizer Mixing Machine [Volume 2, Issue 1, 2023, Pages 68-75]
-
Compression Ratio
Comparative Analysis of Exhaust Emission Pollutants from Two Gasoline Engines [Volume 2, Issue 2, 2023, Pages 143-153]
-
Computational fluid dynamics
Simulating and Evaluating the Effects of Air Passing through a Linear Parabolic Solar Collector on Some Properties of Leaving Air [Volume 1, Issue 2, 2022, Pages 56-60]
-
Comsol Multiphysics
Simulation of Mass and Heat Transfer of Orange Slice during Drying Process under Vacuum Condition Using Finite Element Method [Volume 1, Issue 2, 2022, Pages 51-55]
-
Contact area
Analytical Traction Force Model Development for Soil-Tire Interaction: Incorporating Dynamic Contact Area and Parameter Analysis Using Taguchi Method [Volume 2, Issue 2, 2023, Pages 56-64]
-
Contact patch
A Dynamic Model for Estimating Tire Contact Patch Using Machine Vision Techniques [Volume 2, Issue 2, 2023, Pages 28-38]
-
Control
Online Detection of Tomatoes for Robotic Harvesting [Volume 2, Issue 2, 2023, Pages 130-142]
-
Crop residues
Evaluating Pyrolysis of Cypress Tree Residues in a Continuous Thermal Reactor [Volume 1, Issue 1, 2022, Pages 28-33]
-
Crop Water Stress Index
A Review of Recent Advances in Water Vapor Deficit Sensor Technology for Improving Plant Water Usage Efficiency [Volume 2, Issue 2, 2023, Pages 65-86]
-
Cutting energy
Redesigning a Stalk Chopper Mechanism for Reducing Cutting Energy and Optimizing Its Bite Length [Volume 1, Issue 2, 2022, Pages 69-73]
-
Cutting length change
Redesigning a Stalk Chopper Mechanism for Reducing Cutting Energy and Optimizing Its Bite Length [Volume 1, Issue 2, 2022, Pages 69-73]
-
Cypress
Evaluating Pyrolysis of Cypress Tree Residues in a Continuous Thermal Reactor [Volume 1, Issue 1, 2022, Pages 28-33]
D
-
Dark fermentation
Regulation of Metabolic Pathway for Bio-Hydrogen Production in Dark Fermentation via Redox Potential [Volume 2, Issue 2, 2023, Pages 10-18]
-
Date kernel
Developing and Evaluating a Hot Water-Assisted Extractor for Making Instant Drink from Date Kernels Powder [Volume 2, Issue 1, 2023, Pages 84-98]
-
Date palm harvesting
Design Methodology and Optimum Camera Setups for an Experimental Remote-Control Manipulator for Servicing Date Palms [Volume 2, Issue 1, 2023, Pages 76-83]
-
Date syrup
Design and Building a Date Syrup Extractor and Evaluating It under Different Operating Condition [Volume 2, Issue 1, 2023, Pages 48-55]
-
Date syrup extractor
Design and Building a Date Syrup Extractor and Evaluating It under Different Operating Condition [Volume 2, Issue 1, 2023, Pages 48-55]
-
Deep Learning
Design, Construction, and Evaluation of an Intelligent Frost Forecasting and Warning System [Volume 2, Issue 2, 2023, Pages 47-55]
-
Drying, Infrared
A Study on Drying Kinetics of Rhubarb Medical Plant by an Infrared Dryer [Volume 1, Issue 2, 2022, Pages 80-85]
-
Drying kinetics
Drying Food Waste Using a Conventional Tray Cabinet Dryer [Volume 2, Issue 2, 2023, Pages 1-9]
E
-
Economic analysis
Economic Analysis of Solar Energy Used for Supplying Heating Load and Electricity Required for a Poultry House [(Articles in Press)]
-
Electrical conductivity
An Overview of Ohmic Heating Technology and Its Application in Food Industry [Volume 1, Issue 2, 2022, Pages 37-43]
-
Energy
Effect of Ultrasound on Mechanical Properties of Walnut [Volume 2, Issue 1, 2023, Pages 24-31]
-
Energy
Economic Analysis of Solar Energy Used for Supplying Heating Load and Electricity Required for a Poultry House [(Articles in Press)]
-
Energy storage
Milk Heating Using a Solar Cooker Coupled with Point-Focus Fresnel Lens [Volume 2, Issue 2, 2023, Pages 95-101]
-
Engine
Comparative Analysis of Exhaust Emission Pollutants from Two Gasoline Engines [Volume 2, Issue 2, 2023, Pages 143-153]
-
Environment
Global Trends and Status in Bioenergy Research during the Years 2000-2020: A Systematic Bibliometric Analysis [Volume 1, Issue 1, 2022, Pages 55-69]
-
Environment
Comparative Analysis of Exhaust Emission Pollutants from Two Gasoline Engines [Volume 2, Issue 2, 2023, Pages 143-153]
-
Evaluation
Determining Parameters Affecting the Balance of Compost Fertilizer Mixing Machine [Volume 2, Issue 1, 2023, Pages 68-75]
-
Experimental design
Investigating the Effects of Some Operating Parameters Affecting Biodiesel Production from Used Vegetable Oil [Volume 1, Issue 2, 2022, Pages 65-68]
-
Experimental validation
Thermal Performance of a Parabolic Trough Solar Concentrator Coupled with a Modified Flat Plate Collector for Greenhouse Heating [Volume 1, Issue 1, 2022, Pages 1-11]
-
Extraction efficiency
Developing and Evaluating a Hot Water-Assisted Extractor for Making Instant Drink from Date Kernels Powder [Volume 2, Issue 1, 2023, Pages 84-98]
F
-
FCM clustering algorithm
An Algorithm to Extract the Defective Areas of Potato Tubers Infected with Black Scab Disease Using Fuzzy C Means Clustering for Automatic Grading [Volume 2, Issue 1, 2023, Pages 32-39]
-
Finite Elements
Simulation of Mass and Heat Transfer of Orange Slice during Drying Process under Vacuum Condition Using Finite Element Method [Volume 1, Issue 2, 2022, Pages 51-55]
-
Flow rate
Thermal Performance of a Parabolic Trough Solar Concentrator Coupled with a Modified Flat Plate Collector for Greenhouse Heating [Volume 1, Issue 1, 2022, Pages 1-11]
-
Food industry
An Overview of Ohmic Heating Technology and Its Application in Food Industry [Volume 1, Issue 2, 2022, Pages 37-43]
-
Food waste
Drying Food Waste Using a Conventional Tray Cabinet Dryer [Volume 2, Issue 2, 2023, Pages 1-9]
-
Forward speed
Optimizing the Effect of Spike Density and Combine Speed for Reducing Wheat Loss Using Response Surface Methodology [Volume 2, Issue 2, 2023, Pages 19-27]
-
Fresnel lens
Milk Heating Using a Solar Cooker Coupled with Point-Focus Fresnel Lens [Volume 2, Issue 2, 2023, Pages 95-101]
-
Frost
Design, Construction, and Evaluation of an Intelligent Frost Forecasting and Warning System [Volume 2, Issue 2, 2023, Pages 47-55]
-
Fuel
Comparative Analysis of Exhaust Emission Pollutants from Two Gasoline Engines [Volume 2, Issue 2, 2023, Pages 143-153]
G
-
Green pistachio shell waste
Design and Evaluating a Hydraulic Pelletizing Machine for Producing Feed Pellets from Pistachio Shells [Volume 2, Issue 2, 2023, Pages 112-129]
-
Grid-connected solar panel
Designing, Simulating and Technical Analysis of a 2 MW On-grid Photovoltaic System for Agricultural Applications [Volume 1, Issue 2, 2022, Pages 1-6]
H
-
Harvest losses
Monitoring and Estimating Sugarcane Losses during Harvesting Using Sound Analysis [Volume 2, Issue 1, 2023, Pages 40-47]
-
High Performance Liquid Chromatograph
The Effect of Low Pressure Oven Drying of Chicory Root on Quality and Extraction Time of Inulin [Volume 1, Issue 2, 2022, Pages 61-64]
I
-
Image processing
An Algorithm to Extract the Defective Areas of Potato Tubers Infected with Black Scab Disease Using Fuzzy C Means Clustering for Automatic Grading [Volume 2, Issue 1, 2023, Pages 32-39]
-
Image processing
Online Detection of Tomatoes for Robotic Harvesting [Volume 2, Issue 2, 2023, Pages 130-142]
-
Image processing technique
A Dynamic Model for Estimating Tire Contact Patch Using Machine Vision Techniques [Volume 2, Issue 2, 2023, Pages 28-38]
-
Impact cutting
Measuring Some Mechanical Properties of Boxwood and Privet Plants by an Izod Impact Tester [Volume 1, Issue 2, 2022, Pages 7-12]
-
Infrared radiation
Investigating the Kinetics, Energy and Exergy of Drying Apple Slices Using Infrared Radiation [Volume 2, Issue 1, 2023, Pages 1-10]
-
Instant powder
Developing and Evaluating a Hot Water-Assisted Extractor for Making Instant Drink from Date Kernels Powder [Volume 2, Issue 1, 2023, Pages 84-98]
-
Intelligent agriculture
Design, Construction, and Evaluation of an Intelligent Frost Forecasting and Warning System [Volume 2, Issue 2, 2023, Pages 47-55]
-
Internet of things
Design, Construction, and Evaluation of an Intelligent Frost Forecasting and Warning System [Volume 2, Issue 2, 2023, Pages 47-55]
-
Inulin
The Effect of Low Pressure Oven Drying of Chicory Root on Quality and Extraction Time of Inulin [Volume 1, Issue 2, 2022, Pages 61-64]
-
Iranian rice variety
Investigating some Factors Affecting the Milling of Long-Grain, High-Yielding Rice Varieties Dried in a Fluidized Bed Dryer [Volume 1, Issue 2, 2022, Pages 44-50]
L
-
Laboratory threshing
Investigating the Effect of Some Operating Factors on the Performance of a Laboratory Cluster Threshing Machine – Case Study: Two Barley Varieties [Volume 1, Issue 2, 2022, Pages 86-92]
-
Leachate of waste
Drying Food Waste Using a Conventional Tray Cabinet Dryer [Volume 2, Issue 2, 2023, Pages 1-9]
-
Leaves
Thermal Decomposition and Combustion Characteristics of Pistachio Pruning Residues [Volume 2, Issue 2, 2023, Pages 87-94]
-
Linear parabolic collector
Simulating and Evaluating the Effects of Air Passing through a Linear Parabolic Solar Collector on Some Properties of Leaving Air [Volume 1, Issue 2, 2022, Pages 56-60]
M
-
Magnetic
Effect of Magnetic Field and its Stability on Growth Indices of Parsley (Petroselinum Crispum) Seeds [Volume 2, Issue 2, 2023, Pages 39-46]
-
Manipulator
Design Methodology and Optimum Camera Setups for an Experimental Remote-Control Manipulator for Servicing Date Palms [Volume 2, Issue 1, 2023, Pages 76-83]
-
Mazafati dates
Investigating the Effect of Cold Plasma on some Chemical Properties of Date Fruits (Phoenix dactylifera L.) [Volume 2, Issue 1, 2023, Pages 56-67]
-
Mazafati dates
Design and Building a Date Syrup Extractor and Evaluating It under Different Operating Condition [Volume 2, Issue 1, 2023, Pages 48-55]
-
Mechanism
Redesigning a Stalk Chopper Mechanism for Reducing Cutting Energy and Optimizing Its Bite Length [Volume 1, Issue 2, 2022, Pages 69-73]
-
Metabolic pathway
Regulation of Metabolic Pathway for Bio-Hydrogen Production in Dark Fermentation via Redox Potential [Volume 2, Issue 2, 2023, Pages 10-18]
-
Metal box
A Dynamic Model for Estimating Tire Contact Patch Using Machine Vision Techniques [Volume 2, Issue 2, 2023, Pages 28-38]
-
Milling yield
Investigating some Factors Affecting the Milling of Long-Grain, High-Yielding Rice Varieties Dried in a Fluidized Bed Dryer [Volume 1, Issue 2, 2022, Pages 44-50]
-
Minimization
Optimizing the Effect of Spike Density and Combine Speed for Reducing Wheat Loss Using Response Surface Methodology [Volume 2, Issue 2, 2023, Pages 19-27]
-
Modeling
Investigating the Kinetics, Energy and Exergy of Drying Apple Slices Using Infrared Radiation [Volume 2, Issue 1, 2023, Pages 1-10]
O
-
Offset
Determining Parameters Affecting the Balance of Compost Fertilizer Mixing Machine [Volume 2, Issue 1, 2023, Pages 68-75]
-
Ohmic heating
An Overview of Ohmic Heating Technology and Its Application in Food Industry [Volume 1, Issue 2, 2022, Pages 37-43]
-
Onion
Design and Evaluation of Forced Convection Solar Dryer Equipped with a Heat Exchanger for Crop Drying [Volume 1, Issue 2, 2022, Pages 32-36]
-
On-line detection
Online Detection of Tomatoes for Robotic Harvesting [Volume 2, Issue 2, 2023, Pages 130-142]
-
Orange
Simulation of Mass and Heat Transfer of Orange Slice during Drying Process under Vacuum Condition Using Finite Element Method [Volume 1, Issue 2, 2022, Pages 51-55]
-
Oxidation potential
Regulation of Metabolic Pathway for Bio-Hydrogen Production in Dark Fermentation via Redox Potential [Volume 2, Issue 2, 2023, Pages 10-18]
P
-
Parsley
Effect of Magnetic Field and its Stability on Growth Indices of Parsley (Petroselinum Crispum) Seeds [Volume 2, Issue 2, 2023, Pages 39-46]
-
Pellet quality
Design and Evaluating a Hydraulic Pelletizing Machine for Producing Feed Pellets from Pistachio Shells [Volume 2, Issue 2, 2023, Pages 112-129]
-
Performance ratio
Designing, Simulating and Technical Analysis of a 2 MW On-grid Photovoltaic System for Agricultural Applications [Volume 1, Issue 2, 2022, Pages 1-6]
-
Photovoltaic cells
Damage Detection and Performance Evaluation of Photovoltaic Panels Used in Rural Area through Thermography Analysis [Volume 1, Issue 2, 2022, Pages 74-79]
-
Photovoltaic (PV)
Economic Analysis of Solar Energy Used for Supplying Heating Load and Electricity Required for a Poultry House [(Articles in Press)]
-
Photovoltaic system
Feasibility Study and Simulation of Utilization of Renewable Energies in a Broiler Industry [Volume 2, Issue 1, 2023, Pages 11-23]
-
Physical and chemical properties
Investigating the Effect of Cold Plasma on some Chemical Properties of Date Fruits (Phoenix dactylifera L.) [Volume 2, Issue 1, 2023, Pages 56-67]
-
Placket Burman Design
Investigating the Effects of Some Operating Parameters Affecting Biodiesel Production from Used Vegetable Oil [Volume 1, Issue 2, 2022, Pages 65-68]
-
Pollutant
Comparative Analysis of Exhaust Emission Pollutants from Two Gasoline Engines [Volume 2, Issue 2, 2023, Pages 143-153]
-
Potato Disease
An Algorithm to Extract the Defective Areas of Potato Tubers Infected with Black Scab Disease Using Fuzzy C Means Clustering for Automatic Grading [Volume 2, Issue 1, 2023, Pages 32-39]
-
Power and plane blades
A Study on Improving the Blades of a Three-Blade Horizontal Axis Wind Turbine for Agricultural Areas Using a Laboratory Made Model [Volume 1, Issue 2, 2022, Pages 13-20]
-
Privet
Measuring Some Mechanical Properties of Boxwood and Privet Plants by an Izod Impact Tester [Volume 1, Issue 2, 2022, Pages 7-12]
-
PV-T application
Configuration Designs and Recent Applications of Photovoltaic-Thermal Solar Collectors for Drying Agricultural Material: A Review [Volume 1, Issue 1, 2022, Pages 34-46]
-
PV-T design
Configuration Designs and Recent Applications of Photovoltaic-Thermal Solar Collectors for Drying Agricultural Material: A Review [Volume 1, Issue 1, 2022, Pages 34-46]
-
Pyrolysis
Evaluating Pyrolysis of Cypress Tree Residues in a Continuous Thermal Reactor [Volume 1, Issue 1, 2022, Pages 28-33]
Q
-
Quality characteristic
Developing and Evaluating a Hot Water-Assisted Extractor for Making Instant Drink from Date Kernels Powder [Volume 2, Issue 1, 2023, Pages 84-98]
-
Quality loss
Optimizing the Effect of Spike Density and Combine Speed for Reducing Wheat Loss Using Response Surface Methodology [Volume 2, Issue 2, 2023, Pages 19-27]
R
-
Reactor
Evaluating Pyrolysis of Cypress Tree Residues in a Continuous Thermal Reactor [Volume 1, Issue 1, 2022, Pages 28-33]
-
Remote control
Design Methodology and Optimum Camera Setups for an Experimental Remote-Control Manipulator for Servicing Date Palms [Volume 2, Issue 1, 2023, Pages 76-83]
-
Remote Sensing
Distinguishing Growth Stages of Wheat Crop by Remote Sensing Techniques and Time Series Analysis [Volume 1, Issue 1, 2022, Pages 16-22]
-
Renewable energy
Investigating the Effect of Using of Different Alcohols as Gasoline Additives on an Engine Emitted Pollutants [Volume 1, Issue 2, 2022, Pages 21-25]
-
Renewable energy
Evaluation of the Energy Balance of a Gasoline Engine Using Ethanol and n-Butanol as Additives [Volume 2, Issue 2, 2023, Pages 102-111]
-
Research trend
Global Trends and Status in Bioenergy Research during the Years 2000-2020: A Systematic Bibliometric Analysis [Volume 1, Issue 1, 2022, Pages 55-69]
-
RETSCREEN
Economic Analysis of Solar Energy Used for Supplying Heating Load and Electricity Required for a Poultry House [(Articles in Press)]
-
Rhubarb
A Study on Drying Kinetics of Rhubarb Medical Plant by an Infrared Dryer [Volume 1, Issue 2, 2022, Pages 80-85]
-
Robot
Online Detection of Tomatoes for Robotic Harvesting [Volume 2, Issue 2, 2023, Pages 130-142]
-
Robotic
Design Methodology and Optimum Camera Setups for an Experimental Remote-Control Manipulator for Servicing Date Palms [Volume 2, Issue 1, 2023, Pages 76-83]
-
Rupture force
Effect of Ultrasound on Mechanical Properties of Walnut [Volume 2, Issue 1, 2023, Pages 24-31]
S
-
Safety
Design Methodology and Optimum Camera Setups for an Experimental Remote-Control Manipulator for Servicing Date Palms [Volume 2, Issue 1, 2023, Pages 76-83]
-
Screening, Transesterification
Investigating the Effects of Some Operating Parameters Affecting Biodiesel Production from Used Vegetable Oil [Volume 1, Issue 2, 2022, Pages 65-68]
-
Sensor technologies
A Review of Recent Advances in Water Vapor Deficit Sensor Technology for Improving Plant Water Usage Efficiency [Volume 2, Issue 2, 2023, Pages 65-86]
-
Sentinel-2
Distinguishing Growth Stages of Wheat Crop by Remote Sensing Techniques and Time Series Analysis [Volume 1, Issue 1, 2022, Pages 16-22]
-
Shear energy
Measuring Some Mechanical Properties of Boxwood and Privet Plants by an Izod Impact Tester [Volume 1, Issue 2, 2022, Pages 7-12]
-
Shelf life
Investigating the Effect of Cold Plasma on some Chemical Properties of Date Fruits (Phoenix dactylifera L.) [Volume 2, Issue 1, 2023, Pages 56-67]
-
Simulation
Simulation of Mass and Heat Transfer of Orange Slice during Drying Process under Vacuum Condition Using Finite Element Method [Volume 1, Issue 2, 2022, Pages 51-55]
-
Social network analysis (SNA)
Global Trends and Status in Bioenergy Research during the Years 2000-2020: A Systematic Bibliometric Analysis [Volume 1, Issue 1, 2022, Pages 55-69]
-
Soil stress
Analytical Traction Force Model Development for Soil-Tire Interaction: Incorporating Dynamic Contact Area and Parameter Analysis Using Taguchi Method [Volume 2, Issue 2, 2023, Pages 56-64]
-
Soil-tire interaction
Analytical Traction Force Model Development for Soil-Tire Interaction: Incorporating Dynamic Contact Area and Parameter Analysis Using Taguchi Method [Volume 2, Issue 2, 2023, Pages 56-64]
-
Solar Concentrator
Milk Heating Using a Solar Cooker Coupled with Point-Focus Fresnel Lens [Volume 2, Issue 2, 2023, Pages 95-101]
-
Solar dryer
Configuration Designs and Recent Applications of Photovoltaic-Thermal Solar Collectors for Drying Agricultural Material: A Review [Volume 1, Issue 1, 2022, Pages 34-46]
-
Solar Energy
Simulating and Evaluating the Effects of Air Passing through a Linear Parabolic Solar Collector on Some Properties of Leaving Air [Volume 1, Issue 2, 2022, Pages 56-60]
-
Solar Energy
Feasibility Study and Simulation of Utilization of Renewable Energies in a Broiler Industry [Volume 2, Issue 1, 2023, Pages 11-23]
-
Stability
Effect of Magnetic Field and its Stability on Growth Indices of Parsley (Petroselinum Crispum) Seeds [Volume 2, Issue 2, 2023, Pages 39-46]
-
Stem
Thermal Decomposition and Combustion Characteristics of Pistachio Pruning Residues [Volume 2, Issue 2, 2023, Pages 87-94]
-
Sugarcane primary extractor
Monitoring and Estimating Sugarcane Losses during Harvesting Using Sound Analysis [Volume 2, Issue 1, 2023, Pages 40-47]
-
Sustainable Agriculture
Using Biogas Derived Digestate of Chicken Manure for Wheat Crop Fertilization: A Laboratory-Scale Investigation [Volume 1, Issue 1, 2022, Pages 47-54]
-
Sustainable Agriculture
A Review of Recent Advances in Water Vapor Deficit Sensor Technology for Improving Plant Water Usage Efficiency [Volume 2, Issue 2, 2023, Pages 65-86]
T
-
Temperature
An Overview of Ohmic Heating Technology and Its Application in Food Industry [Volume 1, Issue 2, 2022, Pages 37-43]
-
Terramechanics
Analytical Traction Force Model Development for Soil-Tire Interaction: Incorporating Dynamic Contact Area and Parameter Analysis Using Taguchi Method [Volume 2, Issue 2, 2023, Pages 56-64]
-
Thermal analysis
Evaluating Pyrolysis of Cypress Tree Residues in a Continuous Thermal Reactor [Volume 1, Issue 1, 2022, Pages 28-33]
-
Thermal efficiency
Configuration Designs and Recent Applications of Photovoltaic-Thermal Solar Collectors for Drying Agricultural Material: A Review [Volume 1, Issue 1, 2022, Pages 34-46]
-
Thermal efficiency
Milk Heating Using a Solar Cooker Coupled with Point-Focus Fresnel Lens [Volume 2, Issue 2, 2023, Pages 95-101]
-
Thermal image processing
Damage Detection and Performance Evaluation of Photovoltaic Panels Used in Rural Area through Thermography Analysis [Volume 1, Issue 2, 2022, Pages 74-79]
-
Thermodynamic analysis
Investigating the Kinetics, Energy and Exergy of Drying Apple Slices Using Infrared Radiation [Volume 2, Issue 1, 2023, Pages 1-10]
-
Thermography
Damage Detection and Performance Evaluation of Photovoltaic Panels Used in Rural Area through Thermography Analysis [Volume 1, Issue 2, 2022, Pages 74-79]
-
Thin-layer
Design and Evaluation of Forced Convection Solar Dryer Equipped with a Heat Exchanger for Crop Drying [Volume 1, Issue 2, 2022, Pages 32-36]
-
Time duration
Effect of Ultrasound on Mechanical Properties of Walnut [Volume 2, Issue 1, 2023, Pages 24-31]
-
Time Series
Distinguishing Growth Stages of Wheat Crop by Remote Sensing Techniques and Time Series Analysis [Volume 1, Issue 1, 2022, Pages 16-22]
-
Toughness
Effect of Ultrasound on Mechanical Properties of Walnut [Volume 2, Issue 1, 2023, Pages 24-31]
-
Traction force
Analytical Traction Force Model Development for Soil-Tire Interaction: Incorporating Dynamic Contact Area and Parameter Analysis Using Taguchi Method [Volume 2, Issue 2, 2023, Pages 56-64]
V
-
Vacuum dryer
Simulation of Mass and Heat Transfer of Orange Slice during Drying Process under Vacuum Condition Using Finite Element Method [Volume 1, Issue 2, 2022, Pages 51-55]
-
Vapor Pressure Deficit
A Review of Recent Advances in Water Vapor Deficit Sensor Technology for Improving Plant Water Usage Efficiency [Volume 2, Issue 2, 2023, Pages 65-86]
-
Vitamin C
Investigating the Effects of Using of Biochar as a Replacement for Minerals Premix in Layers Diet on Physical and Mechanical Properties of Their Egg Shells [Volume 1, Issue 1, 2022, Pages 12-15]
W
-
Water heating
Configuration Designs and Recent Applications of Photovoltaic-Thermal Solar Collectors for Drying Agricultural Material: A Review [Volume 1, Issue 1, 2022, Pages 34-46]
-
Water stress detection
A Review of Recent Advances in Water Vapor Deficit Sensor Technology for Improving Plant Water Usage Efficiency [Volume 2, Issue 2, 2023, Pages 65-86]
-
Wheat
Distinguishing Growth Stages of Wheat Crop by Remote Sensing Techniques and Time Series Analysis [Volume 1, Issue 1, 2022, Pages 16-22]
-
Wheat
Optimizing the Effect of Spike Density and Combine Speed for Reducing Wheat Loss Using Response Surface Methodology [Volume 2, Issue 2, 2023, Pages 19-27]
-
Wind Speed
A Study on Improving the Blades of a Three-Blade Horizontal Axis Wind Turbine for Agricultural Areas Using a Laboratory Made Model [Volume 1, Issue 2, 2022, Pages 13-20]
-
Wind turbine
A Study on Improving the Blades of a Three-Blade Horizontal Axis Wind Turbine for Agricultural Areas Using a Laboratory Made Model [Volume 1, Issue 2, 2022, Pages 13-20]
-
Wireless sensor network
Design, Construction, and Evaluation of an Intelligent Frost Forecasting and Warning System [Volume 2, Issue 2, 2023, Pages 47-55]
Z
-
Zadoks scale
Distinguishing Growth Stages of Wheat Crop by Remote Sensing Techniques and Time Series Analysis [Volume 1, Issue 1, 2022, Pages 16-22]
Your query does not match with any item